Sweet Little Girl Hat

This is the little baby girl hat I made in case the newest arrival of my sister turned out to boost our tiny number of females in the family from 5 to 6. Instead we are slipping farther behind (now outnumbered 10-5), but darn! that boy is adorable!! Anyway.  This is my first time writing up a crochet pattern, so if something doesn't make sense, please let me know.

Items Needed:

2 coordinating sport weight yarns - mine are pink (A) and white (B)

Size I crochet hook

yarn needle

Hat:

Holding both yarns together, ch. 4, sl st in first st to make a loop.

Rnd 1:  ch 2 (counts as first hdc), 7 hdc in center of loop, sl st in top of ch 2 (8)

Rnd 2:  ch 2, hdc in same st, 2 hdc in each st, sl st in top of ch 2 (16)

Rnd 3:  ch 2, hdc in same st, * hdc in next st, 2 hdc in next st* repeat from *to*, sl st in top of ch 2 (24)

Rnd 4:  ch 2, hdc in same st, * hdc in next 2 st, 2 hdc in next st* repeat from *to* until last 2 st, hdc in next 2 st, sl st in top ch 2 (32)

Rnd 5:  ch 2, hdc in same st, * hdc in next 3 st, 2 hdc in next st* repeat from *to* until last 3 st, hdc in next 3 st, sl st in top of ch 2. (40)

Rnd 6-8: ch 2, hdc in each st around, sl st in top of ch 2. (40)

Rnd 9-12: ch 2, hdc in back loop only in each st around, sl st in top of ch 2. (40)

Rnd 13: ch 2, hdc in both loops in each st around, sl st in top of ch 2. Fasten off.

Shell edge: 

Using A, fasten on any hdc, ch1, sc in same hdc, *sk next st, 5 dc in next st, sk next st, sc in next st* repeat from *to* 10 times, sl st in first sc. Fasten off. 

Use yarn needle to weave in ends.

Flower Petals:
With A, ch 5, sl st in first ch to make a loop.

Rnd 1: ch 1, 10 sc in loop, sl st in first sc.
Rnd 2: ch 1, sc in same st,  * 5 dc in next st, sc in next st*, repeat from *to* 5 times, sl st in first sc, fasten off leaving a sewing length.

Use sewing length to fasten petals onto the hat between Rnds 9-12.

Flower Center:
With B, ch 13.

Row 1: sc in second ch from hook, sc in each ch across. Fasten off leaving a sewing length.

Roll the row into a spiral, using yarn needle and sewing length, fasten through the bottom until secure. Use remaining sewing length to fasten in the center of the petals. Weave in remaining ends.

A New Baby.

No. Not for me.

I think, aside from holding your own new little one, holding the brand new baby of someone you love is the best. In this case, it is my sister Audrey's newest baby boy.

Pretty checkin' out the boy taking her "baby-of-the-family" title.

About a week before he was born, my sister was up to her elbows in her Before-the-Baby-Comes To-Do list. I offered to help with whatever she wanted, but all she wanted was a crocheted hat to take the then-gender-unknown child home from the hospital in. I made one boy and one girl hat. The girl hat was my own design (I'll get a picture and pattern together for you soon). But it was this little newsie hat that was needed when baby boy Graham appeared.

*taken by his Mommy. Doesn't he look like a doll?

*taken by his Mommy

Audrey put the hat on him for the ride home, and for these pictures, but told me that the hat is just bit snug. So while the pattern says for newborn, average sized Graham found it a bit small. Maybe it's premie/newborn sized. Because this hat is so adorable, Audrey (and her hubby) requested a slightly larger size to wear now through the crazy "Utah Spring" weather (which is not to be confused with actual Spring). I increased the hat by 5 stitches in the 4th row to make it just over an inch bigger around. Everything else is the same.

Well, except for the contrasting strap. I could say I did it to make it easier for them to tell the two hats apart. Or to match the blanket. But really, I ran out of the dark green yarn! (and I just realized that I didn't do the bottom border either...oops... would that look weird in the light green?)

The blanket is from this pattern here. It's a bit bigger than I would normally make crochet blankets, being crib sized instead of car seat friendly small. But this pattern was so pretty, I fell in love! 

Check out this border detail. An easy and great pattern.

 I love to crochet, and I'm always happy when I'm making gift for sweet little babies! Welcome to the world, Graham. We are happy to have you!

*taken by his Mommy

The Mad Hatter Hat Tutorial

Making this hat was a fun experience, however, I must say that I now fully understand why the Mad Hatter's hands are all scarred and bloody. I can't tell you how many times I pricked myself (deep and violently!) on the pins while making this hat! Ouch!

Supplies:

• 1 1/2 yards of main fabric (mine is heavy upholstery fabric)
• 1 1/2 yards of black lace
• 2 yards of lining (used for sash, too)
• 2 yards heavy sew-in interfacing (the thickest you can find!)
• WALKING FOOT! (it probably isn't necessary to have one, but with how thick it can be, it was extremely nice to have)

Details supplies:

• peacock feather
• some ribbon and scrap fabric for patch
• extra piece of heavy sew-in interfacing for fraction tag
• hat pins (or substitute look alike)

The toughest part of any project for me is making up the pattern. I will do my best to explain the math so you can adjust the pattern to your head, but I also wrote the dimensions I used too.

First, to determine the height of the hat, I measured from my chin to mid-forehead and multiplied by 1 1/2. I came up with a height of 10 inches. I measured the circumference of my head and got 22 in. (I made mine 22 in exactly and it fits a bit snug, I think adding an inch here would be a great idea!). Since you need to cut 4, I divided the 22 in by 4 and got 5 1/2 in for the bottom. For the top and brim, I would suggest just using the same that I used. The math brought Jr. High flashbacks... In the end, I came up with 10 1/4" for the top. I added 1/2 in all the way around for sewing allowance making the end dimensions the ones listed in the picture: 

The top of the hat has a 14 in diameter (sewing allowance already added!).

To make the brim piece, I made a circle from pipe cleaner that measured 22 in (you should add an inch. . .) and fit it to my head. Then I traced the slightly elongated circle onto the butcher paper. Next, measure 4 1/2 in from the line (sewing allowance added).

Even though I cut the whole circle out of the butcher paper, I ended up folding it in half and placing on the fold when I cut the fabric.

Cut out the pieces:

Let's start sewing! First, layer interfacing, fabric and lace together of side piece and pin together.

Pin around the edges and in the center. The lace will shift a bit, and that's ok, just try the best you can to make it even.

Baste together around all outer edges. Then, machine quilt it by sewing back and forth in a somewhat random pattern. 

Back View: 

I didn't worry about going all the way down because of the sash that will cover the bottom part.

Repeat for all four side pieces and the top circle as well.

Next, sew the side pieces together to form a round using a 1/2 in seam.

Then pin the sides to the top circle, right sides facing. Make it even around.

The corners will be above the circle. Trim these off (if you want, I didn't) and sew following the circle using a 1/2 in seam allowance. 

Turn it inside out. 

Prepare the brim by layering one side with all three (interfacing, fabric and lace) and the second layering only fabric and lace. Pin and baste around the outside and inside edges of each piece separately (through all layers), but DO NOT machine quilt yet.

Place brims together, right sides facing and sewing around outer edge on 1/2 in seam.

Clip to stitching around the outside edge.

Turn right side out. Iron flat. Pin together. Top stitch around outer edge. Baste inside edges together on 1/2 in seam.

Now is when you machine quilt! This way the brim stays together.

Clip inside edge to stitch line.

Pin brim to right side of hat, matching the front and back center with center of a side piece.

I removed the table piece of the sewing machine and hooked the hat around the machine to sew the brim on. Sew together on 1/2 in seam.

Now you have the hat!! Time to decorate it!

Prepare the lining the same way you made the top of the hat by sewing sides together to make a round, and sewing sides to top. Sew all seams with 1/2 in seam.

Iron bottom edge 1/2 in toward wrong side.

Without turning, drop lining inside the hat. Match the side seams and pin in place. (I just pushed the pins in like a pin cushion because of how thick and stiff the hat is.)

First you need to tack the top of the lining inside, so it doesn't fall down. Thread needle with same color as the lace. Tie a knot in the end of the thread

Find the lining corner (where side seam matches top circle). Tuck inside and match as close to hat corner.

Tack in place by stitching from inside to outside, back in, back out and then tie a knot. Because the thread matches the lace, it won't been seen. Then push the pin back inside and snip the thread off.

Hand stitch the lining edge to the brim, hiding the raw edges.

Next, prepare the sash by cutting 8 inches wide by 47 inches long. I had to sew two long pieces together to get it long enough.

Fold in half, right sides together, and iron. Cut at an angle on each end.

Sew around raw edges, leaving a gap for turning. Trim corners.

Turn right side out and press. Hand stitch opening closed.

Wrap sash around hat 2 times. 

Tie with a square knot  in the back. Each tail should end up being 18 - 19 inches from knot to the longest corner.

Make the fraction tag by cutting a pieces from the heavy sew-in interfacing 6" x 2 1/2". Use a Sharpie to write the fraction 2 1/2" tall.

Tuck the tag in the sash on the left hand side.

My peacock feather had a loop in the end (I think they were for jewelry). Tuck it inside the sash on the right side. I tacked the feather to the hat at the loop.

The patch was made by cutting a scrap fabric 3"  long x 2 1/2" wide. I sewed some stripped ribbon on top to add color. Position the patch on the front off to the right.

Hand stitch the patch on, taking larger stitches so they will show.

I couldn't find hat pins in stores, only online (if someone knows where I can get some, let me know!!) so I ended up using "Wire Stem Accents" that I found in the wedding isle at JoAnns. The picture on the package makes it look like the go in a bouquet.